General Information
Xerox Internal Use Only
Phaser 3320 and WorkCentre 3315/3325
Service Manual
1-31
Maintenance Items
Routine maintenance items are parts or assemblies that require periodic replacement. These items are
typically customer replaceable (CRU).
The listed items have limited life and require periodic replacement.
Print life is based on “typical” office printing and 5% coverage per color on 24 lb. paper. Print life
figures are not guaranteed and varies depending on usage habits. Imaging Unit print life is based on 3-
page jobs using letter-size paper.
Consumables
Consumables consist of a single Print Cartridge. The Print Cartridge (except starter cartridges) has a
CRUM (Customer Replaceable Unit Monitor) to record regional and toner usage information. The
CRUM maintains a count of the amount of toner consumed. When the count reaches set values,
warning and error messages appear to notify the user when near and end of life status is reached.
Life ratings are based on A-size sheets at 5% coverage.
Starter capacity cartridges are packaged with the printer when shipped from the factory. These starter
cartridges are not available for order.
Item
Print Life
Pick Up Roller
Up to 90,000 pages
Retard Roller
Up to 60,000 pages
Transfer Roller
Up to 100,000 pages
Fuser (not customer replaceable)
Up to 90,000 pages
ADF Feed Roller Assembly
Approximately 20,000 sheets
ADF Separator Pad Assembly
Approximately 20,000 sheets
DADF Feed Roller Assembly
Approximately 80,000 sheets
Print Cartridge
Phaser 3320
WorkCentre 3315MFP
WorkCentre 3325MFP
Starter Capacity
5,000 pages
2,300 pages
5,000 pages
Standard Capacity
5,000 pages
2,300 pages
5,000 pages
High Capacity
11,000 pages
5,000 pages
11,000 pages
