![background image](http://html2.mh-extra.com/html/xerox/phaser-3250/phaser-3250_user-manual_3344066024.webp)
5
.5
<Loading print media>
Using tray 1 or the optional tray 2
Use the print material you use for the majority of your print jobs in tray 1.
Tray 1 can hold a maximum of 250 sheets of 75 g/m
2
paper.
You can purchase an optional tray 2 and attach it below tray 1 to load an
additional 250 sheets of paper.
To load paper, pull open the tray and load paper with the side to be
printed on face down.
You can load letterhead paper with the design side face down. The top
edge of the sheet with the logo should be placed at the front of the tray.
Notes
• If you experience problems with paper feed, place one sheet
at a time in the manual feed.
• You can load previously printed paper. The printed side
should be facing up with an uncurled edge at the front. If you
experience problems with paper feed, turn the paper around.
Note that the print quality is not guaranteed.
Changing the size of the paper in tray 1
To load longer sizes of paper, such as Legal-sized paper, you need to
adjust the paper guides to extend the paper tray.
3250-030
3250-042
3
1
2
4
1
paper length guide
2
support guide
3
guide lock
4
paper width guides
1
Press and hold the guide lock, and slide the paper length guide to
locate it in the correct paper size slot.
2
After inserting paper into the tray, adjust the support guide so that it
lightly touches the paper stack.
3
Squeeze the paper width guides, as shown and slide them to the
stack of paper until they lightly touch the side of the stack.
3250-027
3250-028
3250-029
Содержание Phaser 3250
Страница 1: ...User Guide...
Страница 52: ...WWW XEROX COM SUPPORT Software Section...