Xerox LF8040.8045, Руководство пользователя, Страница: 63 / 92

Telephone Lines and Additional Devices · Configuring Telephone Lines and Services ¦ 63
EN
Telephone Lines and
Additional Devices
9
Configuring Telephone Lines and Services
Private Branch Exchange / PABX
PABX Systems
Private branch exchanges (PABX) are typical in many offices and some households. You must
dial an outside line access code in order to get a connection to the public telephone network
(PSTN) from a PABX.
1. Press
OK
,
15
and
OK
.
2. Using
[
select
NETWORK TYPE
.
3. Confirm with
OK
.
4. Using
[
select
PSTN
or
PABX
.
5. Confirm with
OK
.
Setting Up an Extension
Setting Up an Extension
If you are operating the device within a PABX, use function 15 to set the device to the appro-
priate length for internal numbers and to set the code that must be dialled in order to access
a public telephone line (= Outside Line Access Code).
1. Press
OK
,
15
and
OK
.
2. Using
[
select
PREFIX
.
3. Confirm with
OK
.
4. Enter the appropriate length for internal numbers. Use
C
to delete individual characters.
Assume the longest internal number, then add one digit to that. If your direct dial num-
bers consist of four digits, then you should input
5
.
5. Confirm with
OK
.
6. Enter the outside line access code with which you reach the public telephone network.
This is usually
0
.
7. Confirm with
OK
.
Notice
Incorrect Outside Line Access Code
In rare cases, the outside line access code may be a different number or a two-
digit number. For older telephone systems, the outside line access code can be
R (= Flash). Press
Rø
to enter this outside line access code. If the connection
to the public telephone network is not possible, contact your telephone system
supplier.