Xerox Legacy 4110, Параметры печати

Страница: 15 / 24

P
RINT
O
PTIONS
15
Schedule Printing
On/Off Specify if you want to perform advance
print scheduling based on date and
time. If you select On, select the date
and time for the print job. The job is printed based on the date and
time set on the Fiery EXP4110, not the
client workstation.
If multiple jobs are selected and defined with
the same date and time setting, job order is
based on alphabetic order of the file names.
Secure Print Enter an arbitrary password, and then enter
it again from the printer touch panel display
for printing. For more details, see the
documentation that accompanies
the printer. This option is not available for PCL.
Slip Sheet
On/Off Specify whether to insert a slip sheet between
copies or pages of multiple-copy jobs. This option is effective only for non-sorted
or collated jobs.
Slip Sheet Page Size
Letter LEF/Letter SEF/A4 LEF/A4 SEF/
A5 LEF/A5 SEF/A3 SEF/B5 LEF/B5 SEF/
B4 SEF/Statement SEF/8 x10 LEF/
8x10 SEF/8.5x13 SEF/Legal SEF/
11x17 SEF/12x18 SEF/SR-A3 SEF/
B4 SEF Specify the page size to use for
the slip sheet.
Slip Sheet Paper Source
Tray 1/Tray 2/Tray 3/Tray 4/
Tray 5 (MSI)/Tray 6 (HCF1)/
Tray 7 (HCF2)/Interposer
(D-Finisher) Specify the paper tray to use for the
slip sheet.
Stapler Mode
Off/Left Bottom Single/Right Bottom
Single/Left Top Single/Right Top Single/
Double (Left or Top)/Double (Right
or Bottom)/Single (Left or Top)/
Single (Right or Bottom) Specify the number and position of staples.
Text/Graphics Enhancement
Printer’s default/On/Off Specify if you want to sharpen the
edges of text or vector graphics. This option is not available for PCL.
Toner Reduction
Printer’s default/Off/On Select On to conserve the amount of
toner used to print a job.
Transparency Interleaving
Off/On Select On to print multiple transparency
sheets separated by blank, plain paper pages.
Transparency Interleave Paper Source
Tray 1/Tray 2/Tray 3/Tray 4/Tray 6
(HCF1)/Tray 7 (HCF2) Specify the paper tray to use for
transparency interleaving.
Tray Alignment
Enable/Disable Specify if you want to enable tray alignment. For more information, see Utilities .
Option and settings
(default setting is underlined)
Description Requirements, constraints,
and information