background image

Xerox® Wide Format IJP 2000
User Guide

xv

Caution Notes

CAUTION:

When cleaning this product, always switch off and unplug it. Access to a live machine interior may 
cause electric shock.

Do not unplug or re-plug this product with the switch on. Plugging and unplugging a live 
connector may deform the plug and generate heat, and eventually cause a fire accident.

Hold the plug not the cord when unplugging this product, or it may damage the cord and cause 
electric shock or a fire accident.

Always switch off and unplug the machine when it is not used over weekends or long holidays.  It 
may cause deterioration of insulations and eventually electric shock or a fire accident.

Once a month, switch off this product and check to see that:

the power cord is plugged firmly into an electrical outlet;

the plug is not excessively heated, rusted or bent;

the plug and electrical outlet are free of dust; and

the power cord is not cracked or worn down.

Once you notice any unusual condition, switch off and unplug this product first and contact your 
local Xerox representative.

Содержание IJP 2000



















































































































































Отзывы: