Xerox Fiery EXP4110, Конфигурация и настройка

Страница: 40 / 108

S
ETTING UP THE
F
IERY
EXP4110
FROM THE
C
ONTROL
P
ANEL
40
LPD Setup options
Enable LPD
Yes/No [Yes]
Select Yes to allow lpd printing.
PServer Setup options
N
OTE
: If you do not use PServer Setup, continue with the remaining Service Setup menus
starting with “Windows Setup options” on page 48.
Enable PServer
Yes/No [No]
Select Yes if you have a Novell network connected to the Fiery EXP4110.
Choose NDS Setup if your network uses NetWare in native mode. Choose Bindery Setup if
your network uses NetWare in bindery emulation mode.
If your network uses both NDS and Bindery, set up NDS first. If you set up NDS after
Bindery, you will overwrite Bindery Setup.
N
OTE
:
If your network uses both NDS and Bindery, and uses NetWare servers in bindery
emulation, the Fiery EXP4110 cannot service NDS and bindery emulation servers on the
same NDS tree.
NDS Setup
Before entering NDS settings, make sure the Fiery EXP4110 is connected to the network and
that you have configured an NDS directory tree with a Printer, Print Server, and one or more
Print Queue objects for Fiery EXP4110 jobs (see
page 12 ). To perform NDS Setup, you may
need permission to browse the NDS tree. If access to the Print Server is restricted, you must
have a logon password.
Network Setup
Service Setup
LPD Setup
Network Setup
Service Setup
PServer Setup
Network Setup
Service Setup
PServer Setup