Xerox FD70, Руководство пользователя

Страница: 53 / 64

Maintenance Xerox
®
FD70 Scanner
Scanner User Guide 47
• Steady red : the scanner is busy or it is not connected to the computer.
• Flashing red : the scanner is reporting an error.
Scanner Status Message Table
The LCD displays an error image or code. The following table lists the images, possible causes and
common resolutions.
If you are unable to resolve the issue using the troubleshooting steps in this table, please refer to
the section “Troubleshooting” on page 44.
Error Image Problem Description Solution
ADF Paper Jam.
Paper has jammed
while being fed
through the
scanner.
Document sensors
are dirty.
Open the scanner, remove the pages,
then close the scanner. Please see
“Clearing Paper Jams” on page 35 for complete
instructions.
If problem persists, clean the rollers
and paper sensors as described in
the section “Cleaning the Inside of the Scanner”.
Multi-feed.
Two pages have
fed through the
scanner at the
same time.
When a double feed sheet is inserted
in the scanner, the sensors will
identify it and act according to user
settings. On the scanner LCD menu,
three options will appear: Ignore
(continue scanning), Continue (restack
images and continue scanning)
or Cancel scan. Use the arrow
buttons to select an option and the
Duplex button to confirm your
selection.
If you select Continue, open the
scanner, remove the pages, then
close the scanner. Make sure there
are no pages stuck together.
If problem persists, clean the rollers
and paper sensors as described in
the section “Cleaning the Inside of the Scanner”.
ADF Cover Open.
A scanner access
cover is open.
Verify all covers on the scanner are fully closed
before scanning.