Using the Hard Disk Drive for Secure and Proof Jobs
5-10
❖
DP N24, N32 and N40 System Administrator Guide
Creating Proof Job
Proof printing lets you print a single copy of a multiple copy job. You
assign a password and copy count at your workstation or computer
before printing. The first set is printed immediately. You can then go to
the printer and proofread (proof) the first set. Depending on the outcome
of the proofing, you can then decide either to continue printing the
remaining sets or to delete the job after entering your password on the
Printer Control Panel.
Proof jobs, if not sent by a driver with the proof job feature, may be
invoked in both PCL and PostScript by preceding the job with the
following PJL commands:
@PJL XPROOFJOB
@PJL XJOBPASSWORD = "number"
These commands must be immediately followed by a standard PJL
“JOB” command that includes the “jobname” and the PJL command
“XJOB PASSWORD”.
The printer continues processing all subsequent data as part of the proof
job of name “job name.” The proof job is stored with the name “job
name” and associated with the password defined in the PJL
XPASSWORD command. The proof job ends when the PJL End of Job
command is received (i.e., @PJL EPJ). The “EOJ” command should be
followed by a UEL.
The job name is limited to 16 alphanumeric characters in the range
ASCII 30 through ASCII 255, <SP> and <HT>. The password must
contain four numeric characters in the range ASCII 48 through ASCII
55. The printer assigns a default job name if no name or a name with a
syntax error is called out. The job name is the name displayed on the
Control Panel Password Menu when the associated password is entered.
If no password is assigned or there is a password syntax error, the entire
job is printed immediately and is not stored as a proof job.
The following example creates a PCL proof job with the name “Sample”
associated with password “7777” requesting five collated sets.
< E S C > % - 1 2 3 4 5 X @ P J L X P R O O F J O B
@ P J L X J O B P A S S W O R D = 7 7 7 7
@ P J L J O B N A M E = " S a m p l e "
@ P J L E N T E R L A N G U A G E = P C L
. . . P C L f i l e . . .
< E S C > % - 0 1 2 3 4 5 X @ P J L E O J
< E S C > % - 0 1 2 3 4 5 X .
Содержание DP N24
