Xerox DocuPrint N3225, Руководство системного администратора

Страница: 53 / 325

Using the Menu System
Chapter 1: Configuring the Printer
❖
1-45
Config Exec/B5
Specify whether Exec or B5-JIS will be
recognized by the tray size switches.
The available values are:
Exec*
B5-JIS
Exec is the inches default.
B5-JIS is the millimeters default.
1. Press Menu Up or Menu
Down until you see:
Menus
System Menu
2. Press Item Up or Item
Down
until you see:
System Menu
Config Exec/B5
3. Press Value Up or Value
Down
until you see:
Config Exec/B5 =
New Value
4. Press Enter . You will see:
System Menu
Config Exec/B5
5. Press On Line . You will see:
Ready
Power Saver
Specify a period of inactivity after
which time the printer will enter a low
power state. The available values are:
Off (never enter Power Saver mode)
15
30
60*
90
120
180
1. Press Menu Up or Menu
Down
until you see:
Menus
System Menu
2. Press Item Up or Item
Down until you see:
System Menu
Power Saver
3. Press Value Up or Value
Down
until you see:
P o w e r S a v e r =
New Value
4. Press Enter . You will see:
System Menu
Power Saver
5. Press On Line . You will see:
Ready
Table 1.14 System Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.14 Page 10 of 11