Xerox DocuPrint N3225, Руководство системного администратора

Страница: 47 / 325

Using the Menu System
Chapter 1: Configuring the Printer
❖
1-39
Print Quantity
Set multiple copies of each page. The
available values are:
1* - 999
The number of copies changes
incrementally by 1 each time either
Value Up or Value Down is
pressed. Holding down Value Up
or Value Down causes continuous
scrolling through the number of
copies.
1. Press Menu Up or Menu
Down until you see:
Menus
System Menu
2. Press Item Up or Item
Down
until you see:
System Menu
Copies
3. Press Value Up or Value
Down
until you see:
C o p i e s =
New Value
4. Press Enter . You will see:
System Menu
Copies
5. Press On Line . You will see:
Ready
Duplex
Enable or disable duplex printing for
PostScript and PCL jobs. The available
values are:
Off*
Long Edge
Short Edge
This item is only available when the
optional Duplex Module is installed.
For information on the use of Long
Edge and Short Edge printing, see
“Duplex (Two-Sided) Printing”
(page 1-121).
1. Press Menu Up or Menu
Down
until you see:
Menus
System Menu
2. Press Item Up or Item
Down until you see:
System Menu
Duplex
3. Press Value Up or Value
Down
until you see:
D u p l e x =
New Value
4. Press Enter . You will see:
System Menu
Duplex
5. Press On Line . You will see:
Ready
Table 1.14 System Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.14 Page 4 of 11