Xerox DocuPrint N3225, Руководство системного администратора

Страница: 40 / 325

Using the Menu System
1-32
❖
System Administrator Guide
Orientation
Set the default orientation used in
PCL.
The available values are:
Portrait*
Landscape
1. Press Menu Up or Menu
Down until you see:
Menus
PCL Menu
2. Press Item Up or Item
Down
until you see:
PCL Menu
Orientation
3. Press Value Up or Value
Down
until you see:
Orientation =
New Value
4. Press Enter . You will see:
PCL Menu
Orientation
5. Press On Line . You will see:
Ready
Form Length
Set the number of lines per page used
in PCL. The available values are:
005 - 128 ( 60* USA) ( 64* Europe)
Form Length is automatically adjusted
when Paper Size is changed. For
example, setting Paper Size to
A4
adjusts Form Length to 64
automatically. Setting Paper Size to
Letter adjusts Form Length to
60
. Whenever Paper Size is changed,
Form Length is recalculated using the
formula: Form Length = ((logical page
length in inches - 1 inch) * 6).
The Form Length value changes
incrementally by 1 each time either
Value Up
or
Value Down
is
pressed. Holding down Value Up
or
Value Down
causes continuous
scrolling through the Form Length
values.
The value of this setting after
performing a Reset Menus depends
on the value of the Defaults setting.
1. Press Menu Up or Menu
Down
until you see:
Menus
PCL Menu
2. Press Item Up or Item
Down until you see:
PCL Menu
Form Length
3. Press Value Up or Value
Down
until you see:
F o r m L e n g t h =
New Value
4. Press Enter . You will see:
PCL Menu
Form Length
5. Press On Line . You will see:
Ready
Table 1.12 PCL Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.12 Page 4 of 5