Xerox DocuPrint N3225, Руководство системного администратора

Страница: 38 / 325

Using the Menu System
1-30
❖
System Administrator Guide
Pitch
Set the pitch of the PCL default font
(when the PCL default font is a
scalable fixed pitch font). The
available values are:
.44 - 99.99 ( 10.00* )
The pitch changes incrementally by
.01 each time either
Value Up or
Value Down is pressed. Holding
down Value Up or Value
Down causes continuous scrolling
through the Pitch values.
1. Press Menu Up or Menu
Down until you see:
Menus
PCL Menu
2. Press Item Up or Item
Down
until you see:
PCL Menu
Pitch
3. Press Value Up or Value
Down
until you see:
P i t c h =
New Value
4. Press Enter . You will see:
PCL Menu
Pitch
5. Press On Line . You will see:
Ready
Point Size
Set the point size of the PCL default
font (when the PCL default font is a
scalable proportional font). The
available values are:
4.00 - 999.75 ( 12.00* )
The point size changes incrementally
by .25 each time either
Value Up
or Value Down is pressed.
Holding down Value Up or Value
Down causes continuous scrolling
through the point sizes.
1. Press Menu Up or Menu
Down
until you see:
Menus
PCL Menu
2. Press Item Up or Item
Down until you see:
PCL Menu
Point Size
3. Press Value Up or Value
Down
until you see:
P o i n t S i z e =
New Value
4. Press Enter . You will see:
PCL Menu
Point Size
5. Press On Line . You will see:
Ready
Table 1.12 PCL Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.12 Page 2 of 5