Xerox DocuPrint N3225, Руководство системного администратора

Страница: 107 / 325

Using the Menu System
Chapter 1: Configuring the Printer
❖
1-99
Test Print
Print a two page “test pattern” for
analysis of print quality over the entire
page (intended for use by the service
provider).
The number of Test Prints produced is
determined by the value of Print
Quality in the System Menu.
Printed format is determined by the
Default Source and Default Type. All
test prints are printed at 600x600 dpi.
1. Press Menu Up or Menu
Down until you see:
Menus
Test Menu
2. Press Item Up or Item
Down
until you see:
Test Menu
Test Print
3. Press Enter . You will see:
Processing...
Test
4. After the Test Print prints, you
will see:
Ready
Disk Directory
Print a copy of the disk directory.
One copy is printed regardless of the
Print Quantity value in the System
Menu.
This item is only available if the
optional Hard Disk Drive is installed.
1. Press Menu Up or Menu
Down until you see:
Menus
Test Menu
2. Press Item Up or Item
Down until you see:
Test Menu
Disk Directory
3. Press Enter . You will see:
Processing...
Disk Directory
4. After the Disk Directory prints,
you will see:
Ready
Table 1.28 Print Menu functions
Menu Item and Function Keystrokes Display
Table 1.28 Page 3 of 4