Xerox DocuPrint N3225, Руководство системного администратора

Страница: 101 / 325

Using the Menu System
Chapter 1: Configuring the Printer
❖
1-93
Primary Server
Set the name of the Primary file server
(a name of 2 to 47 characters in
length). The available values are:
A - Z, 0 - 9, hyphen (-) and underscore (_)
Null*
For this item (after Step 3), Item
Up moves the cursor to the right
through the displayed Primary Server
name and
Item Down moves the
cursor to the left. This allows you to
change characters within the string
rather than having to re-enter the
entire string.
With the cursor displayed under a
character,
Value Up increments
the value of that character and
Value
Down decrements the value.
From any cursor position, you
can null out (delete) to the end
of the string by selecting the
space character with
Value
Up or Value Down and
then pressing Enter .
1. Press Menu Up or Menu
Down until you see:
Menus
Novell Menu
2. Press Item Up or Item
Down
until you see:
Novell Menu
Primary Server
3. Press Value Up or Value
Down
. You will see:
P r i m a r y S e r v e r =
xxx...xxx
4. Press Value Up or Value
Down to change the value
of the character above the
cursor. The value is
incremented or decremented
by 1 each time the key is
pressed. Holding down
Value
Up or Value Down
causes continuous scrolling
through the values.
P r i m a r y S e r v e r =
xxx...xxx
5. To change other characters in
the Primary Server name, press
Item Up or Item
Down
to scroll right or left
respectively through the
character string, then press
Value Up or Value
Down
to change the value
of the character above the
cursor (as in Step 4).
P r i m a r y S e r v e r =
xxx...xxx
6. When you have completed
setting the Primary Server
Name, press
Enter . You
will see:
Novell Menu
Primary Server
7. Press On Line . You will see:
Ready
Table 1.26 Novell Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.26 Page 5 of 7