Xerox DocuPrint N24, Руководство системного администратора

Страница: 55 / 398

Loading Paper
Chapter 2: Paper Handling
❖
2-7
Using Trays 1, 2 and 3
(if installed)
Trays 1 and 2 in the printer, and Tray 3 in the optional
2,500 Sheet Feeder hold up to 500 sheets of 20 lb (80 g/
m
2
) paper each. Refer to the section “Selecting Paper”
(page 2-2) for acceptable paper sizes and weights.
1
Pull out the tray (Tray 1 is shown above)
until it stops.
2
Prepare a stack of paper, making sure the
tops of the sheets are aligned.
3
Gently lift up the width guide and slide it
all the way until it stops.
If you are replacing paper of the same
size, skip to Step 5 on page 2-8.
4
Press down the gray handle and slide the
side guide all the way until it stops.