Xerox DocuPrint N24, Руководство системного администратора, Страница: 31 / 398

Installing the Printer
Chapter 1: Getting Started
❖
1-21
Precautions
Please observe the following precautions for installing
and using your DocuPrint N40 printer. Please leave a
minimum of 30 inches above the printer when the
Mailbox is installed.
To avoid fire hazard:
• Do not place the printer in a location with high
temperature and humidity, poor ventilation, or a high
level of dust.
• Do not place the printer near heaters or similar objects.
• Never block the printer’s ventilation openings. Be sure to
leave ample space between the ventilation openings and
the nearest wall or other surface. (Refer to Figures 1.4
and 1.5 for space requirements.)
• Do not place the printer near alcohol, benzene, or other
volatile and flammable materials.
To avoid electric shock or fire hazard:
• Do not connect the printer to any power source until you
are instructed to do so.
• Do not plug the printer into an AC outlet with incorrect
voltage.
• The printer must be properly grounded. Do not bypass the
ground plug. Use a three-prong connection.
• Do not use a multi-extension cord connector.
• If using an extension cord, do not use one with rated
current less than 125V 15A (250V 13A in Europe). Do not
damage or modify the extension cord. Do not bend, pull
or place heavy objects on the extension cord.
• Never touch the GFI (Ground Fault Interrupt) or plug with
wet hands.
• If you do not use the GFI, Xerox does not guarantee the
successful operation of your machine.