Xerox DocuPrint N24, Руководство системного администратора

Страница: 20 / 398

Special Features
1-10
❖
DocuPrint N24, N32, and N40 System Administrator Guide
Automatic Tray
Sequencing
The DocuPrint N40 allows you to set automatic tray
sequencing for both PCL and PostScript jobs. When a
paper tray runs out of paper, the printer automatically
switches to another paper tray (if another tray is loaded
with the same size and type paper). That means you don't
have to load paper as often. You can also install the
optional 2,500 Sheet Feeder (with one 500 sheet tray and
two 1,000 sheet trays) to extend your printing capacity.
For more information on tray switching, see the section
“Automatic Tray Switching” (page 2-20) in
Chapter 2: Paper Handling.
Automatic Language
Sensing and
Switching
The printer can process both PCL and PostScript jobs.
When the printer's Language Sensing option is on, the
DocuPrint N40 samples the incoming data stream to
determine which language the print job requires. The
DocuPrint N40 then switches to the proper interpreter for
that job.
Language Sensing can be set individually for each port,
or protocol within a port, from the Parallel Menu and from
the Ethernet and Novell Menus by setting the appropriate
PDL setting to Auto.
With the Language Sensing option on, the printer
automatically samples each print job and switches to the
appropriate processing language.
For more information about language sensing and
switching, see Chapter 3: Using the Control Panel.