Xerox DocuPrint N24, Руководство системного администратора

Страница: 184 / 398

Downloading Fonts and Macros
5-4
❖
DocuPrint N24, N32, and N40 System Administrator Guide
FSDOWNLOAD
Command
The FSDOWNLOAD command is used to download fonts
or macros to the DocuPrint N40 file system. If a file with
the same name exists, the downloaded file overwrites it.
Click for Updated Information
Syntax @PJL FSDOWNLOAD FORMAT:BINARY [SIZE=int] [NAME = “ pathname ”] [<CR>] <LF>
<binary data><ESC>%-12345X
Parameters Parameter Functional Range Default
SIZE=
integer
0 to 2
31
- 1 N/A
NAME=” pathname ” ASCII 01 thru 255 N/A
SIZE
=
integer
— The size variable indicates the number of bytes in the file to be
downloaded. The size indicates the number of bytes immediately following the <LF> to the
next UEL command.
NAME
=
“pathname”
— where “
pathname
” = 0:\PCL\FONTS\<fontname> to download
a font named “fontname” to the DocuPrint N40 or = 0:\PCL\MACROS\<macroname> to
download a macro named “macroname” to the DocuPrint N40. “Fontname/macroname”
can be any combination of up to 512 alphanumeric characters.
< binary data > — This is the binary file data to be downloaded, such as font files and
macro data.
Use of 1 rather than 0 in the “pathname” will download the font or macro to the
Flash RAM rather than to the hard drive.