Xerox DocuPrint N24, Руководство системного администратора

Страница: 159 / 398

Novell Menu
Chapter 3: Using the Control Panel
❖
3-81
Primary Server
Set the name of the Primary file server
(a name of 2 to 47 characters in
length). The available values are:
A - Z, 0 - 9, hyphen (-) and underscore (_)
Null*
For this item (after Step 3),
Item
Up moves the cursor to the right
through the displayed Primary Server
name and
Item Down moves the
cursor to the left. This allows you to
change characters within the string
rather than having to reenter the entire
string.
With the cursor displayed under a
character,
Value Up
increments
the value of that character and Value
Down
decrements the value.
From any cursor position, you
can null out (delete) to the end
of the string by selecting the
space character with
Value
Up or Value Down
and then pressing Enter .
1. Press Menu Up or Menu
Down
until you see:
M e n u s
N o v e l l M e n u
2. Press Item Up or Item
Down until you see:
N o v e l l M e n u
P r i m a r y S e r v e r
3. Press Value Up or Value
Down
. You will see:
P r i m a r y S e r v e r =
xxx...xxx
4. Press Value Up or Value
Down
to change the value
of the character above the
cursor. The value is incremented
or decremented by 1 each time
the key is pressed. Holding
down
Value Up or Value
Down
causes continuous
scrolling through the values.
P r i m a r y S e r v e r =
xxx...xxx
5. To change other characters in
the Primary Server name, press
Item Up
or
Item Down
to scroll right or left respectively
through the character string,
then press
Value Up or
Value Down
to change the
value of the character above the
cursor (as in Step 4).
P r i m a r y S e r v e r =
xxx...xxx
6. When you have completed
setting the Primary Server Name,
press
Enter . You will see:
N o v e l l M e n u
P r i m a r y S e r v e r
7. Press
On Line
. You will see:
R e a d y
Table 3.15 Novell Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 3.15 Page 4 of 6