Xerox DocuPrint N24, Руководство системного администратора

Страница: 139 / 398

Ethernet Menu
Chapter 3: Using the Control Panel
❖
3-61
Default Gateway
Set the four byte Default Gateway
address. The available values are:
xxx.xxx.xxx.xxx
Where xxx = 000 to 255
.
This item only appears if IP Address Res. is
set to
Control Panel
.
For this item (after Step 3), Item
Up
moves the cursor to the right
through the displayed Default Gateway
address and
Item Down
moves
the cursor to the left. This allows you to
change characters within the string
rather than having to reenter the entire
string.
With the cursor displayed under a
character,
Value Up increments
the value of that character and Value
Down decrements the value.
1. Press Menu Up or Menu
Down
until you see:
M e n u s
E t h e r n e t M e n u
2. Press Item Up or Item
Down until you see:
E t h e r n e t M e n u
D e f a u l t G a t e w a y
3. Press Value Up or Value
Down
. You will see:
D e f a u l t G a t e w a y =
xxx.xxx.xxx.xxx
4. Press Value Up or Value
Down
to change the value
of the character above the
cursor. The value is incremented
or decremented by 1 each time
the key is pressed. Holding
down
Value Up or Value
Down
causes continuous
scrolling through the values.
D e f a u l t G a t e w a y =
xxx.xxx.xxx.xxx
5. To change other characters in
the Default Gateway address,
press
Item Up
or
Item
Down to scroll right or left
respectively through the
character string, then press
Value Up
or
Value
Down to change the value
of the character above the
cursor (as in Step 4).
D e f a u l t G a t e w a y =
xxx.xxx.xxx.xxx
6. When you have completed
setting theDefault Gateway
address, press
Enter . You
will see:
E t h e r n e t M e n u
D e f a u l t G a t e w a y
7. Press On Line . You will see:
R e a d y
Table 3.13 Ethernet Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 3.13 Page 10 of 11