Xerox DocuPrint N24, Руководство системного администратора

Страница: 109 / 398

PCL Menu
Chapter 3: Using the Control Panel
❖
3-31
Form Length
Set the number of lines per page used
in PCL. The available values are:
005 - 128 (
60*
USA) (
64*
Europe)
Form Length is automatically adjusted
when Paper Size is changed. For
example, setting Paper Size to
A4
adjusts Form Length to 64
automatically. Setting Paper Size to
Letter adjusts Form Length to 60 .
Whenever Paper Size is changed, Form
Length is recalculated using the
formula: Form Length = ((logical page
length in inches - 1 inch) * 6).
The Form Length value changes
incrementally by 1 each time either
Value Up or Value Down is
pressed. Holding down
Value Up
or Value Down causes continuous
scrolling through the Form Length
values.
The value of this setting after
performing a Reset Menus depends on
the value of the Defaults setting.
1. Press Menu Up or Menu
Down
until you see:
M e n u s
P C L M e n u
2. Press Item Up or Item
Down until you see:
P C L M e n u
F o r m L e n g t h
3. Press Value Up or Value
Down
until you see:
F o r m L e n g t h =
New Value
4. Press Enter . You will see:
P C L M e n u
F o r m L e n g t h
5. Press On Line . You will see:
R e a d y
Table 3.8 PCL Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 3.8 Page 3 of 4