Xerox DocuPrint N24, Руководство системного администратора

Страница: 107 / 398

PCL Menu
Chapter 3: Using the Control Panel
❖
3-29
Table 3.8 PCL Menu functions
Menu Item and Function Keystrokes Display
Font Number
Set the default font in PCL. The
available values are:
0*
- 999
These numbers are assigned by the
printer and should not be confused
with the user defined ID numbers
associated with font downloading
(creation).
The font number changes incrementally
to the next valid ID each time either
Value Up
or
Value Down
is
pressed. Holding down Value Up
or
Value Down
causes continuous
scrolling through the font numbers.
(Accelerated scrolling may be affected
by the time taken to ascertain the next
possible value.)
1. Press Menu Up or Menu
Down
until you see:
M e n u s
P C L M e n u
2. Press Item Up or Item
Down until you see:
P C L M e n u
F o n t N u m b e r
3. Press Value Up or Value
Down
until you see:
F o n t N u m b e r =
New Value
4. Press Enter . You will see:
P C L M e n u
F o n t N u m b e r
5. Press On Line . You will see:
R e a d y
Pitch
Set the pitch of the PCL default font
(when the PCL default font is a scalable
fixed pitch font). The available values
are:
.44 - 99.99 ( 10.00* )
The pitch changes incrementally by .01
each time either
Value Up
or
Value Down is pressed. Holding
down Value Up or Value
Down causes continuous scrolling
through the Pitch values.
1. Press
Menu Up
or
Menu
Down until you see:
M e n u s
P C L M e n u
2. Press Item Up or Item
Down until you see:
P C L M e n u
P i t c h
3. Press
Value Up
or
Value
Down until you see:
P i t c h =
New Value
4. Press
Enter
. You will see:
P C L M e n u
P i t c h
5. Press On Line . You will see:
R e a d y
Table 3.8 Page 1 of 4