Xerox DocuPrint N2025, Руководство системного администратора

Страница: 127 / 256

Using the Menu System
Chapter 1: Configuring the Printer
❖
1-111
Disk Initialize
Initialize the Hard Disk Drive. The
available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
1. Press Menu Up or Menu
Down until you see:
Menus
Reset Menu
2. Press Item Up or Item Down
until you see:
Reset Menu
Init Disk
3. Press Value Up or Value Down
until you see:
Init Disk =
Yes
4. Press Enter . You will see:
Reset Menu
Init Disk
5. Press Online . You will see:
Ready
Disk Format
Format the Hard Disk Drive. The
available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
1. Press Menu Up or Menu
Down
until you see:
Menus
Reset Menu
2. Press Item Up or Item Down
until you see:
Reset Menu
Disk Format
3. Press Value Up or Value Down
until you see:
Disk Format =
Yes
4. Press Enter . You will see:
Disk Format
Please Wait ...
5. When the formatting is
complete, you will see:
Ready
Flash Format
Format flash memory. The available
values are:
Yes
No*
1. Press Menu Up or Menu
Down
until you see:
Menus
Reset Menu
2. Press Item Up or Item Down
until you see:
Reset Menu
Flash Format
3. Press Value Up or Value Down
until you see:
Flash Format =
Yes
4. Press Enter . You will see:
Flash Format
Please Wait ...
5. When the formatting is
complete, you will see:
Ready
Table 1.31 Reset Menu Functions (continued)
Menu Item and Function Keystrokes Display
Table 1.31 Page 3 of 3