Xerox DocuPrint C3300 DX Скачать руководство пользователя

Страница: 169 / 200

7.14 Moving the Printer

169

7.14

Moving the Printer

Carry out the following procedure when moving the printer.

Important

• This product weighs 27.4 Kg (DocuPrint C3300 DX)/24.4 Kg (DocuPrint C2200). When moving it, always

carry it by a team of two or more persons to avoid mishandling or injury.

• When lifting this product, firmly grip the recessed areas provided on both sides of the machine. Never lift

it by gripping any other areas. It will prevent you from dropping the product and getting back ache or
injuries.

• If the 550 sheet feeder (optional) has been installed, uninstall it before moving the printer. If these are

not fixed securely to the printer, they may fall to the ground and cause injuries. For details on how to
uninstall the optional accessories, refer to the each manual that is bundled with each accessory.

• The front side of this printer is heavier than the rear. Take note of this difference in weight when moving

the printer.

Press the power switch for the printer to the
<

{

> position to switch off the power.

Disconnect the power cord, interface cable,
and any other cables.

Important

• Never touch the power cord with wet hands. It may

cause electric shock.

• Hold the plug not the cord when unplugging this

product, or it may damage the cord and cause electric
shock or a fire accident.

Remove any paper in the output tray and
return the paper stopper to its original
position, if it is extended.

Содержание DocuPrint C3300 DX








































































































































































































Результаты поиска

Содержание DocuPrint C3300 DX

Отзывы:

Похожие инструкции для DocuPrint C3300 DX

Бренды по названию

Популярные бренды

Xerox DocuPrint C3300 DX, Руководство пользователя

Результаты поиска

Содержание DocuPrint C3300 DX

Отзывы:

Похожие инструкции для DocuPrint C3300 DX

Бренды по названию

Популярные бренды