![background image](http://html1.mh-extra.com/html/xerox/document-workcentre-480cx/document-workcentre-480cx_online-users-manual_3939665112.webp)
Book
TOC
Chapter
TOC
Search
Quit
3-36
3
When the number you want appears in the display, press the
Start/Enter button to commence dialing. If a document is
loaded in the Automatic Document Feeder, transmission begins
when the remote machine answers.
Searching for a Number in Memory
There are two ways to search for a number in memory. You can
either scan from A to Z sequentially, or you can enter the first
letter of the name associated with the number.
Searching Sequentially through Memory
1
Press the Search button, then press the Up or Down buttons to
move through the memory until you find the number you want.
Pressing the Down button allows you to search downward
through the entire memory in alphabetical order (from A to Z),
and pressing the Up button allows you to search upward in
reverse alphabetical order (from Z to A).
Each time you press the Down or Up buttons, the display shows
the next number stored in memory.
While searching through the machine’s memory, you’ll see that
each entry is preceded by one of three letters: ‘T’ for One-
Touch dial, ‘S’ for speed, or ‘G’ for group dial number. These
letters indicate how the number is stored.
Next Page
Previous Page
Содержание Document WorkCentre 480cx
Страница 1: ...To Quit Acrobat Thank you please click on the X in the corner...
Страница 178: ...Book TOC Chapter TOC Search Quit 5 16 Next Page Previous Page...
Страница 185: ...Book TOC Chapter TOC Search Quit 5 23 Next Page Previous Page...
Страница 294: ...Book TOC Chapter TOC Search Quit 8 8 8 Close the control panel firmly until it clicks into place Next Page Previous Page...