Xerox document centre285 series, Руководство пользователя

Страница: 64 / 209

3.5 Outputting
52
Useful Operations
3
3.5.2 Outputting all jobs in the printer
To execute and print all jobs received in the printer.
This operation can stop the receiving of data and empty the buffer.
The procedure is as follows:
There is also a way to erase all jobs in the printer. Refer to "3.4.2 Canceling from printer" for details.
Procedure
When the display is at the state as shown on the
left, press .
The printer will enter the Pause mode.
When is pressed, the printer will automatically
be unable to receive data.
Press .
The printing begins.
When all the jobs have been executed and
printed, "Printer paused" will be shown.
For parallel interface, data might be received in the
midst of a job depending on the timing when is pressed in Step .
In this case, all data following this will be recognised as a new job after is pressed and then
processed as a new job after exiting the pause state in Step .
Press .
"Ready to print" will be shown.
After exiting the pause state here, data that have been
treated as a new job will not be printed properly if the
Print Mode is set to Auto.
"5.3 Common Menu Items" regarding the Print Mode setting.