Xerox document centre 235 series, Руководство пользователя

Страница: 40 / 209

2.5 Setting IP Address
28
S
e
tting Up
2
Outputting Printer Settings List
Procedure
Print out the Printer Settings List by referring to "5.4 Outputting Reports/Lists".
Check the following items under Communication Settings on the Printer Settings list:
● TCP/IP: IP Address
●
TCP/IP:Subnet Mask
● TCP/IP: Gateway Address
● WINS Server: Primary Server IP Address
● WINS Server: Secondary Server IP Address
Refer to the following section on how to check the Printer Settings List.
Checking Printer Settings List
●
When the addresses in TCP/IP and WINS are not obtained:
There is no DHCP server and WINS server.
Set the IP address by referring to "2.5.2 Setting Address".
● When the address in TCP/IP is obtained but not in WINS:
There is no WINS server. Do not use the DHCP environment as the printer may not be
usable due to a change in the IP address allocated to the machine.
Set the IP address manually by referring to "2.5.2 Setting Address".
● When the addresses in both TCP/IP and WINS are obtained:
The DHCP server and WINS server are in operation. It is recommended to use the DHCP
environment. When the DHCP environment is used, the printer IP address is set by the
DHCP server. The name, "FX-xxxxxx" listed in Host Name of SMB under Communication
Settings in the Printer Settings List is registered in the WINS server.