Xerox document centre 235 series, Руководство пользователя

Страница: 137 / 209

5.3 Common Menu Items
125
Mode
M
e
nu and Common Menu
5
Buffer Size
(con’t...) Parallel, NetWare Memory, USB Memory, Port9100 Memory,
EtherTalk Memory
Sets the memory capacity between 64-1024KB with 32KB per unit. Default is
256K. EtherTalk Memory is available only when PostScript Kit is installed.
LPD Spool, SMB Spool
The candidate values are:
•
Off (default)
No spool processing will be done. When processing LPD/SMB printing from a
computer, data by the same interface cannot be received from other
computers. The memory capacity of the receive buffer for LPD/SMB is
between 64-1024KB with 32KB per unit. Default is 256K.
• Hard Disk
Spool processing will be done. For the receive buffer used for spool
processing, the hard disk is used. Available only when the Printer HDD Kit is
installed.
• Memory
Spool processing will be done. For the receive buffer used for spool
processing, memory is used. When this candidate value is selected, the
memory capacity of the receive buffer used for spool processing is set
between 0.51-32.00MB with 0.25MB per unit. Default is 1.00M.
Print data that is larger than the set memory capacity cannot be received. For
such instance, select either Off or Hard Disk.
IPP Spool
The candidate values are (when the Printer HDD Kit is installed):
•
Off (default)
No spool processing will be done. When processing IPP printing from a
computer, data by the same interface cannot be received from other
computers. The memory capacity of the receive buffer for IPP is between 64-
1024KB with 32KB per unit. Default is 256K.
•
Hard Disk
Spool processing will be done. For the receive buffer used for spool
processing, the hard disk is used.
The candidate values are (when the Printer HDD Kit is not installed):
• between 64-1024KB with 32KB per unit. Default is 256K.
Menu Item Explanation