background image

5 – 7

Xerox DocuColor 3535 Printer/Copier

Envelopes

Envelopes can be fed from Tray 5 (Bypass). You can use 
envelopes for print jobs. Copying on envelopes is not supported.

Three types of envelopes are supported:

Monarch 7 3/4 “ (98.4 mm x 190.5 mm)

Commercial #10 (104.8 mm x 241.3 mm)

DL (110 mm x 220 mm)

1

Load a maximum of 10 envelopes into Tray 5 (Bypass) at a time. 
You may be able to fit a few more depending on the thickness of 
the envelope, but do not exceed the max fill line on the tray.

Envelopes must be loaded LEF, face down in Tray 5 (Bypass).

The flap should be closed, and enters the machine first.

The machine is not designed to handle high-capacity 
production envelope printing.

The envelope may wrinkle depending on its weight and 
stiffness.

2

In the Printer Driver, you must select Custom Paper Size to use 
envelopes.

3

Set the Media Type to Heavyweight 2.

Содержание DocuColor 3535













































































































































































































































































Отзывы: