Xerox DocuCentre SC2020 Скачать руководство пользователя страница 295

Страница: 295 / 322

Problem Solving

Xerox

DocuCentre

SC2020

User Guide

292

Paper Jams in Tray 5 (bypass)

Follow the steps below to clear a paper jam in the Tray 5 (bypass).
1.

Inspect the inside (around the paper feed entrance) of the Tray 5 (bypass), and remove the jammed
paper.

If multiple sheets of paper were loaded, remove all the paper while you clear the jam.

Note:

If the paper tears, check to make sure there are no remaining shreds in the device.

If multiple sheets of paper were loaded, align the corners of the removed paper.

Insert the paper with the side to print on facing down, aligning it so that its leading edge lightly
contacts the paper feed entrance.

Document Jams

Follow the steps below to remove the jammed document in the document feeder.
1.

Pull up the front handle of the document feeder top cover, and open the document feeder top cover
completely.

Note:

The cover will remain fixed in position when fully opened. Open the cover slowly.

Содержание DocuCentre SC2020



































































































































































































































































































































Результаты поиска

Содержание DocuCentre SC2020

Отзывы:

Xerox DocuCentre SC2020, Руководство пользователя, Страница: 295 / 322

Результаты поиска

Содержание DocuCentre SC2020

Отзывы: