Xerox DocuCentre-III C4100, Руководство пользователя

Страница: 55 / 523

Replacing Consumables
53
M
ai
n
te
na
nc
e
3
8
Fasten the unit into position by
rotating the screws clockwise.
9
Close the side cover.
10
Connect the power cord, then turn the power switch on of the machine.
11
Select [Fuser Assembly] on the [Consumables Status] screen.
When the [Consumables Status] screen does not appear on the touch screen, press
the <Machine Status> button on the control panel, select the [Supplies] tab on the touch
screen, then select [Fuser Assembly].
12
Select [Reset Counter] on the screen.
13
Select [Yes] on the screen to reset the counter.
Replacing the Transfer Belt Cleaner
The Transfer Belt Cleaner lasts approximately 100,000 copies and prints. The machine
will display a warning message approximately 1,500 copies and prints before the
cleaner reaches the end of its life. Another message will be displayed at this point when
the cleaner needs to be replaced.
1
Select [Transfer Belt Cleaner] on the [Supplies] screen or the [Consumables Status]
screen.
2
Pull the front cover open.