Xerox DocuCentre-III C4100, Руководство пользователя

Страница: 53 / 523

Replacing Consumables
51
M
ai
n
te
na
nc
e
3
5
Remove the new Second Bias
Transfer Roll unit from its box and
insert it into the machine.
6
Place the unit in the machine,
aligning the arrow indicators.
7
Fasten the unit into position by
rotating the screws clockwise.
8
Close the side cover.
9
Select [Reset Counter] on the screen.
10
Select [Yes] on the screen to reset the counter.
Replacing the Fuser Unit
The fuser unit lasts approximately 100,000 copies and prints. The machine will display
a warning message approximately 1,500 copies and prints before the unit reaches the
end of its life. Another message will be displayed when the unit needs to be replaced.
CAUTION
z
Fuser Safety
When removing the fuser unit, always switch off first and wait for 30 minutes until
it cools off.