Xerox DocuCentre-III C4100, Руководство пользователя

Страница: 130 / 523

5 Tools
128
T
ools
5
Color Balance - Cyan Balance
Set the default density levels for the [Color Balance] in the [Image Quality] screen.
You can set density levels of cyan for each of the [Low Density], [Medium Density], and [High
Density].
Color Balance - Black Balance
Set the default density levels for the [Color Balance] in the [Image Quality] screen.
You can set density levels of black for each of the [Low Density], [Medium Density], and [High
Density].
Color Shift
Set the default value for [Color Shift] in the [Image Quality] screen.
2 Sided Copying
Set the default value for [2 Sided Copying] in the [Layout Adjustment] screen and [Output
Format] screen.
Mixed Sized Originals
Set the default value for [Mixed Sized Originals] in the [Layout Adjustment] screen.
Edge Erase - Top & Bottom Edge
Set the default value for the amount of edge erased from the original in the top directions in
[Edge Erase] in the [Layout Adjustment] screen. Set the value from 0 to 50 mm in 1 mm
increments.
Edge Erase - Left & Right Edge
Set the default value for the amount of edge erased from the original in the left directions in
[Edge Erase] in the [Layout Adjustment] screen. Set the value from 0 to 50 mm in 1 mm
increments.
Center Erase/Binding Erase
Set the default value for the binding erase amount of the original in [Edge Erase] in the
[Layout Adjustment] screen. Set the value from 0 to 50 mm in 1 mm increments.
Image Shift - Side 1
Set the default value for [Side 1] of [Image Shift] in the [Layout Adjustment] screen.
Image Shift - Side 2
Set the default value for [Side 2] of [Image Shift] in the [Layout Adjustment] screen.
Image Rotation
Set the default value for [Image Rotation] in the [Layout Adjustment] screen.
Image Rotation Direction
Set the default value for [Image Rotation - Rotation Direction], if documents are of mixed
orientations.
Original Orientation
Set the default value for [Original Orientation] in the [Layout Adjustment] screen.
Multiple-Up
Set the default value for [Multiple-Up] in the [Output Format] screen.