![background image](http://html1.mh-extra.com/html/xerox/color-1000-press/color-1000-press_system-administration-manual_3808728080.webp)
9. Select the desired tray, and then select the Start button.
A Test Print status button is displayed while the print process occurs.
Upon completion of the test prints, the next Fold Adjustment Test Print screen displays.
This screen will vary depending on the selected Fold Type.
10. Obtain the printed samples from the output area of the machine.
11. Measure the sample output and record both z-fold positions on a sheet of paper.
12. Enter the measurement values that you obtain during the previous step in the “A”
Length window and/or the “B” Length window by using the up/down arrow buttons.
13. Select the Start button.
A Test Print status button is displayed while the print process occurs.
Upon completion of the test prints, the following window appears:
14. Select either:
a) Done Adjusting: Select this if the output meets customer satisfaction.
This closes the current window and returns you to the main Fold Adjustment
window. The new/edited fold adjustment profile is displayed in the Fold Adjustment
window.
b) Continue Adjusting: Select this if the output does not meet customer satisfaction
and requires further adjusting.
Xerox
®
Color 800/1000 Press
6-22
System Administration Guide
Profiles
Содержание Color 1000 Press
