Xerox C8130, Руководство пользователя

Страница: 309 / 420

2. Remove the jammed paper from the door B upper and lower areas.
Note:
• If the paper is torn, remove all torn pieces of paper from the printer.
• If the paper is inaccessible, refer to Clearing Jams at Door A .
3. For paper that is jammed in the paper tray, open the tray and remove the paper.
4. To close door B, push up the door until it clicks into place.
T R O U B L ES H O O T I N G PA P E R J A M S
Multiple Sheets Pulled Together
PPRRO OB BA AB BLLEE C CA AU USSEESS SSO OLLU UTTIIO ON NSS
The paper tray is too full. Remove some of the paper. Do not load paper past fill
line.
The edges of the paper are not even. Remove the paper, align the edges, and then reload it.
The paper is moist from humidity. Remove the paper from the tray, and replace it with
new dry paper.
Too much static electricity is present.
• Try a new ream of paper.
• Do not fan transparencies before loading in tray.
Using unsupported paper. Use only Xerox approved paper. For details, refer to
Supported Paper .
Humidity is too high for coated paper. Feed paper one sheet at a time.
Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide
309
Troubleshooting