Xerox B310, Краткое руководство пользователя

Страница: 4 / 12

2. Configure the settings.
• Enable Wi-Fi Direct —Enables the printer to broadcast its own
Wi-Fi Direct network.
• Wi-Fi Direct Name —Assigns a name for the Wi-Fi Direct
network.
• Wi-Fi Direct Password —Assigns the password for negotiating
the wireless security when using the peer-to-peer connection.
• Show Password on Setup Page —Shows the password on the
Network Setup Page.
• Auto-Accept Push Button Requests —Lets the printer accept
connection requests automatically.
Note: Accepting push-button requests automatically is
not secured.
C Coonnnneeccttiinngg aa m moobbiillee ddeevviiccee ttoo tthhee pprriinntteerr
Note: This feature is available only in some printer models.
Before connecting your mobile device, make sure that Wi-Fi Direct has
been configured. For more information, see
Configuring Wi-Fi Direct .
C Coonnnneeccttiinngg U Ussiinngg W Wii--FFii D Diirreecctt
Note: These instructions apply only to Android mobile
devices.
1. From the mobile device, go to the settings menu.
2. Enable Wi-Fi , and then tap Wi-Fi Direct .
3. Select the printer Wi-Fi Direct name.
4. Confirm the connection on the printer control panel.
C Coonnnneeccttiinngg U Ussiinngg W Wii--FFii
1. From the mobile device, go to the settings menu.
2. Tap Wi-Fi , and then select the printer Wi-Fi Direct name.
Note: The string DIRECT-xy (where x and y are two random
characters) is added before the Wi-Fi Direct name.
3. Enter the Wi-Fi Direct password.
C Coonnnneeccttiinngg tthhee PPrriinntteerr ttoo aa W Wii--FFii N Neettw woorrkk
Note: This feature is available only in some printer models.
Before you begin, make sure that:
• Active Adapter is set to Auto. From the control panel, navigate to
Settings > OK > Network/Ports > OK > Network Overview > OK >
Active Adapter > OK > Auto > OK
.
• The Ethernet cable is not connected to the printer.
1. From the control panel, navigate to Settings > OK > Wireless >
OK > Setup On Printer Panel > OK > Choose Network > OK .
2. Select a Wi-Fi network, and then type the network password.
Note: For Wi-Fi-network-ready printer models, a prompt
to set up the Wi-Fi network appears during initial setup.
Clearing Jams
A Avvooiiddiinngg JJaam mss
LLooaadd PPaappeerr PPrrooppeerrllyy
• Make sure that the paper lies flat in the tray.
Correct loading of paper Incorrect loading of paper
• Do not load or remove a tray while the printer is printing.
• Do not load too much paper. Make sure that the stack height is
below the maximum paper fill indicator.
• Do not slide paper into the tray. Load paper as shown in the
illustration.
• Make sure that the paper guides are positioned correctly and are
not pressing tightly against the paper or envelopes.
• Push the tray firmly into the printer after loading paper.
U Ussee RReeccoom mm meennddeedd PPaappeerr
• Use only recommended paper or specialty media.
• Do not load paper that is wrinkled, creased, damp, bent, or curled.
• Flex, fan, and align the paper edges before loading.
• Do not use paper that has been cut or trimmed by hand.
• Do not mix paper sizes, weights, or types in the same tray.
• Make sure that the paper size and type are set correctly on the
computer or printer control panel.
• Store paper according to manufacturer recommendations.
IIddeennttiiffyyiinngg JJaam m LLooccaattiioonnss
• When Jam Assist is set to On, the printer flushes blank pages or
pages with partial prints after a jammed page has been cleared.
Check your printed output for blank pages.
• When Jam Recovery is set to On or Auto, the printer reprints
jammed pages.
4