Xerox B210, Руководство по обслуживанию

Страница: 50 / 142

July 2019
3-9 Xerox® B210 Service Manual
IQ9, IQ10
Image Quality Initial Release
IQ9 Residual Image (Ghosting) RAP
The image from a previous print appears on the current print, Figure 1 .
Procedure
Switch off the machine.
Check the Transfer Roll,
PL 4.1 Item 10 for the following:
• Wear or damage.
• The left and right tension springs for damage.
• Be sure all parts are installed correctly.
The Transfer Roller is OK.
Y
N
Install a new Transfer Roll, PL 4.1 Item 10 .
If fault persists, install new components in the following order:
Refer to the Xerox® B210 User Guide, Section 6 Maintenance, General Care, for detailed
instructions on how to Install a new Toner Cartridge or Drum Cartridge.
1.
Drum Cartridge
2. Toner Cartridge
3. Fuser Module, PL 5.1 Item 26 .
4. HVPS PWB, PL 4.1 Item 2 .
Figure 1 Ghost Image
IQ10 Side 2 Staining
Side 2 of a simplex or duplex print is stained, Figure 1 .
Procedure
Switch off the machine. Check the Transfer Roll, PL 4.1 Item 10 for the following:
• Wear or damage.
• The left and right tension springs for damage.
• Be sure all parts are installed correctly.
The Transfer Roller is OK.
Y
N
Install a new Transfer Roll, PL 4.1 Item 10 .
If fault persists, Install a new Fuser Module, PL 5.1 Item 26 .
Figure 1 Side 2 Staining