![background image](http://html.mh-extra.com/html/xerox/b210/b210_service-manual_885193029.webp)
July 2019
2-8
Xerox® B210 Service Manual
07-500 , 07-530
Initial Release
Status Indicator RAPs
07-500 Manual Feed Slot Paper Empty RAP
BSD-ON:
BSD 1
The Registration Sensor failed to detect paper in the Manual Feed Slot.
Initial Actions
Ensure that paper is loaded in the tray. Clear any jammed sheets. Refer to Section 7: Trouble-
shooting, in the Xerox® B210 User Guide for detailed instructions on clearing paper jams.
Procedure
Check the Registration Sensor actuator.
The actuator moves freely and is undamaged.
Y
N
•
Verify no contamination is present.
•
Install a new Registration Sensor Actuator,
PL 4.4 Item 19
.
The sensor signal changes.
Y
N
Check for 3.3 VDC on the Main PWB.
The voltage is present on the Main PWB.
Y
N
•
Install a new HVPS PWB,
PL 4.1 Item 2
.
•
Install a new Main PWB,
PL 1.1 Item 7
.
Install a new Feed Sensor PWB,
PL 4.4 Item 20
.
Perform SCP 4 Final Actions.
07-530 Paper Feed Fault - Manual Feed Slot RAP
BSD-ON:
BSD 1
The lead edge was not detected by the Paper Feed Sensor.
Initial Actions
Clear any jammed sheets. Refer to Section 7: Troubleshooting, in the Xerox® B210 User
Guide for detailed instructions on clearing paper jams.
Procedure
Check the position of the jammed sheet.
The lead edge reached the Retard Roll.
Y
N
•
Check for an open or short circuit.
•
Install a new Feed Sensor,
PL 4.4 Item 20
.
Check the feed again.
The clutch engages.
Y
N
•
Check for an open or short circuit.
•
Install a new Feed Clutch,
PL 4.1 Item 5
.
Perform SCP 4 Final Actions.
Check the Paper Feed actuator.
The actuator moves freely and is undamaged.
Y
N
Install a new Feed Sensor Actuator,
PL 4.4 Item 18
.
Inspect the Feed Sensor for damage.
The sensor is OK.
Y
N
•
Check for an open or short circuit.
•
Install a new Feed Sensor PWB,
PL 4.4 Item 20
.
Check the circuit of the Feed Sensor PWB.
Содержание B210
