network printer. For Macintosh OS X systems, TCP/IP is preferred. Unlike TCP/IP, however, Bonjour
does not require printers or computers to have IP addresses.
With TCP/IP protocols, each printer and computer requires a unique IP address. Many networks, cable,
and DSL routers have a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server
automatically assigns an IP address to every computer and printer on the network that is configured
to use DHCP.
If you use a cable or DSL router, for information on IP addressing, refer to the documentation for your
router.
EEnnaabblliinngg tthhee PPrriinntteerr ffoorr SSccaannnniinngg
If the printer is connected to a network, you can scan to any of the following locations.
• FTP
• SMB
• HTTP
• HTTPS
• SFTP
• An email address
• A shared folder on your computer
For details, refer to
Note:
If your printer is connected using a USB cable, you cannot scan to an email address or a
network location, such as a shared folder on your computer.
For details, refer to the
System Administrator Guide
at
www.xerox.com/office/B1022_B1025docs
.
PPoow
weerr SSaavveerr M
Mooddee
Power Saver mode reduces power consumption when the printer is left idle for a specified period.
PPoow
weerr SSaavveerr LLeevveellss
There are two power-saver levels:
•
Power Saver Mode 1 Timer
: This mode ends your current session and puts the printer in a sleep
mode.
•
Power Saver Mode 2 Timer
: This mode powers off the printer.
EExxiittiinngg PPoow
weerr SSaavveerr M
Mooddee
The printer exits Power Saver mode automatically when any of the following events occur:
• Pressing a button on the control panel
• Touching the UI screen
• Receiving data from a connected device
Xerox
®
B1025 Multifunction Printer
User Guide
35
