PPrriinnttiinngg TTaakkeess TToooo LLoonngg
Probable Causes
Solutions
The printer is set to a slower printing mode. For
example, the printer could be set to print on
Heavyweight paper.
It takes more time to print on certain types of special
paper. Ensure that the paper type is set properly in
the print driver and at the printer control panel. For
details, refer to
.
The printer is in power-saver mode.
It takes time for printing to start when the printer is
exiting power-saver mode.
The way the printer was installed on the network.
Determine if a print spooler or a computer sharing
the printer is buffering all print jobs, then spooling
the jobs to the printer. Spooling can slow print
speeds. To test the speed of the printer, print
information pages, such as the Office Demo Page. If
the page prints at the rated speed of the printer,
check for a network or printer installation issue. For
help, contact the system administrator.
The job is complex.
Wait for the document to finish printing.
The print-quality mode in the print driver is set to
Enhanced.
In the print driver, change the print-quality mode to
Standard
.
PPrriinntt JJoobb FFaaiillss ttoo PPrriinntt
Probable Causes
Solutions
The printer has an error.
• To clear the error, power off the printer, then power it on again.
• If the error persists, contact your Xerox
®
representative.
The printer is out of paper.
Load paper in the tray.
For details, refer to
A toner cartridge is empty.
Replace the empty toner cartridge.
For details, refer to
.
The power cord is not plugged
into the outlet correctly.
Power off the printer, then confirm that the power cord is plugged in
correctly to the printer and the outlet. Power on the printer. For details,
refer to
Powering the Printer On or Off
. If the error persists, contact your
Xerox
®
representative.
122
Xerox
®
B1022 Multifunction Printer
User Guide
