Xerox ApeosPort-III C7600 Скачать руководство пользователя страница 206

Страница: 206 / 369

Fa
x

4 Fax

204

Facsimile Information Services

For information on subscriptions and advanced operating procedures, contact the

corresponding facsimile information service.

Using the Receiver

Pick up the telephone receiver.

Select [Manual Receive] from the drop-down menu.

Specify the fax number of the facsimile information service.

The call destination can be specified using the numeric keypad, address numbers,
or one touch buttons. The address book cannot be used.

The call destination can be specified also with the keyboard displayed on the screen.
Pressing [More Characters] on the screen displays symbols.

Note

•

When the line type is set to a pulse line, [Tone (:)] does not appear.

•

If you want to send tones (or to use the touch-tone services) while using a pulse line, select
[Tone (:)].

•

Some touch-tone services may not be available even if you set your telephone to send
tones.

When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.

When input is finished, press the <Start> button.

Note

•

The <Online> indicator on the control panel lights and reception begins.

Place the receiver back in the cradle.

Important •

Make sure that the receiver is placed properly in the cradle. Otherwise, the line will remain
"busy".

Содержание ApeosPort-III C7600

















































































































































































































































































































































































Результаты поиска

Содержание ApeosPort-III C7600

Отзывы:

Похожие инструкции для ApeosPort-III C7600

Бренды по названию

Популярные бренды

Xerox ApeosPort-III C7600, Руководство пользователя

Результаты поиска

Содержание ApeosPort-III C7600

Отзывы:

Похожие инструкции для ApeosPort-III C7600

Бренды по названию

Популярные бренды