Xerox ApeosPort-II 3000, Руководство пользователя

Страница: 95 / 619

Output Format
93
Copy
3
[Watermark - Control Number] Screen
You can set a control number within the range from 1 to 999.
1
Select [On].
2
Set the start number using [ ] and
[ ] or with the numeric keypad.
„ Off
No control number is printed.
„ On
A control number is printed. Enter the starting number of the control number.
[Watermark - Text] Screen
Select the text to print on the copy.
1
Select [On].
2
Select any text.
„ Off
No text is printed.
„ On
Text is printed. You can select stamp text from 3 preset text or from the text set in the
System Administration mode.
For information on how to register text, refer to "Custom Text 1 to 3" (P.274).
[Watermark - User Account Number] Screen
When using User Administration or Auditron Administration, a user account number is
printed.
Note • [User Account Number] is the No. (User Administration Number) registered by users in
Login Setup/Auditron Administration.
• This screen is displayed when the Auditron Administration feature is enabled . If the Login
Setup/Auditron Administration feature is used, [User Account Number] is displayed even
when no data is collected. In this case, even if [On] is selected for [User Account Number],
the No. registered by users (User Administration Number) is not printed.
1
Select [On].
„ Off
The user account number is not printed.
„ On
The user account number is printed. However, nothing will be printed if user
authorization has not taken place.