Xerox ApeosPort-II 3000, Руководство пользователя

Страница: 143 / 619

Transmission Options
141
Fa
x
4
Priority Send / Delayed Start (Specifying Send Priority/Send Time)
Priority Send allows you to give priority to a fax or polling job over other jobs. Delayed
Start allows you to specify when to send your fax.
Note • This feature is unavailable for iFax and Server Fax.
• If the Priority Send feature is selected during transmission, the fax will be sent after the
current transmission ends.
• [Priority Send] can be set in combination with [Delayed Start]. If both features are set,
Priority Send is performed at the set time.
• In redial mode, the fax will be resent preferentially after the set redial interval.
• The Priority Send feature cannot be set separately for each recipient of Broadcast and multi-
polling jobs.
You can give priority to a pending job. For more information, refer to "Checking Current/Pending Jobs"
(P.351).
You can specify a transmission time for a fax using the Delayed Start feature. It is useful
for sending fax when communication charges are low, such as during night time.
Important • If a power failure occurs or if the power is turned off after the Delayed Start feature is set, the
setting is cleared and transmission begins as soon as the power is turned on.
Note • You can specify a time within 24 hours in 1 minute increments. You cannot specify a date.
• You can set [Delayed Start] separately for each address number. For information on how to
register address numbers, refer to "Address Book" (P.328).
• If address numbers or group dial numbers are used for the Broadcast Send feature, the
Delayed Start setting specified for each address number is invalid.
• If the fax cannot be sent at the specified time because, for example, the telephone line is
busy, it will be sent as soon as the line becomes available.
• The default value of [Start Time] can be changed in the System Administration mode. For
more information, refer to "Delayed Start - Start Time" (P.307).
1
Select [Priority Send / Delayed
Start] on the [Transmission
Options] screen.
2
Select [On] of [Priority Send] to set
Priority Send, and select [On] of
[Delayed Start] to set Delayed
Start.
„
Priority Send
z
Off
Priority Send is not applied.
z
On
Priority Send is applied.
„ Delayed Start
z
Off
Delayed Start is not applied.
z
On
Delayed Start is applied.
„ Start Time
Displays the [Delayed Start - Start Time] screen.
Refer to "[Delayed Start - Start Time] Screen" (P.142).