![background image](http://html1.mh-extra.com/html/xerox/apeosport-ii-3000/apeosport-ii-3000_user-manual_882965138.webp)
4 Fax
136
Fa
x
4
Reduce/Enlarge (Specifying a Scan Ratio)
This feature enlarges or reduces scanned images with a specified ratio.
Important •
Some machines may not be able to receive faxes at the specified ratio.
1
Select [Reduce/Enlarge].
2
Select a preset ratio, or specify a
value.
Note
•
The default options
displayed on the screen can
be changed except [100%] and [Auto %]. For more information, refer to "Reduce/Enlarge
Presets" (P.312).
•
If a magnification is specified in [Reduce/Enlarge], automatic rotation transmission does not
work. For information about the feature, refer to "Rotate 90 degrees" (P.308).
100%
Scans at the same size as the original.
Auto %
If the scan width of the document is greater than the maximum image size, the scanned
image is rotated or reduced to fit the maximum size.
When speed dialing is used, the maximum image size will be the size registered in
Address Number. When speed dialing is not used, the maximum size will be A3.
You can specify whether to rotate documents in the System Settings. For more information, refer to "Rotate
Variable %
Touch the box displaying a value, and then use the numeric keypad or the [ ] and [ ]
buttons to specify a ratio within the range of 50 - 400% in 1% increments.
Stamp (Adding a Stamp when Scanning a Document)
This feature prints a circular stamp on the bottom corner of each document page when
it is fed through the document feeder. This helps you easily check if the document has
been scanned correctly.
Important •
This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
•
Stamp marks cannot be printed to the following documents:
-
Documents placed on the document glass
-
Documents suspended by pressing the <Stop> button
-
Documents suspended by paper jams
-
Single-sided documents longer than 600 mm
-
Two-sided documents longer than 431.8 mm
-
Documents not fed into the document feeder.
-
Documents suspended due to memory overflow
-
Documents that were being scanned when suspending an immediate transmission
1
Select [Stamp].
2
Select [On].
@
Содержание ApeosPort-II 3000
