Xerox ApeosPort C6550 I, Руководство администратора сети

Страница: 62 / 132

9 Using CentreWare Internet Services
60
Us
in
g
C
e
n
tre
W
a
re
Int
e
rn
e
t Se
rv
ic
e
s
9
EtherTalk
This section describes the settings for EtherTalk.
Note • EtherTalk can be set only when an optional PostScript3 kit is connected.
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address entry column on
the web browser, and press the <Enter> key.
z Example of the IP address entry
http://192.168.1.1/
z Example of the Internet address entry
http://xxx.yyyy.zz.vvv/
Note • When specifying a port number, add “:” and a port number to the end of the Internet address.
3
Click the [Properties] tab.
4
Click [+] on the left of [Protocol Settings] to display the items in the folder.
5
Click [EtherTalk].
6
Configure the following items.
Note • Click [Help] at the top right of the CentreWare Internet Services screen for details on the
setting items.
1) Set [Printer Name].
2) Set [Zone Name].
7
Reflect the values as the machine's setting values.
1) Click the [Apply New Settings]. A screen to enter the user name and password will
be displayed.
2) Enter the System Administrator UserID and password into [User Name] and
[Password], and then click [OK].
Note • The default UserID is “11111” and password is “x-admin”.
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot]. The machine will reboot and the setting value will be reflected.