Xerox ApeosPort C6550 I, Руководство администратора сети, Страница: 52 / 132

8 Installation When Using EtherTalk
50
In
st
al
la
tio
n
W
h
en
U
s
in
g
E
the
rT
a
lk
8
Preparations
Prepare the following items to install the machine when using EtherTalk interface.
z EtherTalk network environment
z PostScript3 kit (optional)
Installation Procedure
Installation Overview
The machine can be connected to computers using an EtherTalk network.
The following is the procedure to use EtherTalk.
z Configuration on the Machine
Setting EtherTalk on the machine.
z Configuration on the computer
Installing a print driver.
Configuration on the Machine
The following describes the configuration procedure to connect the machine to
EtherTalk network.
Enable the EtherTalk port
Note • EtherTalk can be configured when a PostScript3 kit (optional) is installed.
• The configuration can also be performed using CentreWare Internet Services or
CentreWare Utilities.
For information how to use CentreWare Internet Services, refer to "Using CentreWare Internet
Services" (P.53).
1
Display the [System Administrator Menu] screen.
1) Press the <Log In/Out> button.
2) Enter the UserID with the numeric keypad or a keyboard displayed by pressing
[Keyboard], and select [Confirm].
Note • The default UserID is “11111”. When using the Authentication feature, a password is
required. The default password is “x-admin”.
3) Select [System Settings].
2
Enable the EtherTalk port.
1) Select [System Settings].
2) Select [Network Settings].
3) Select [Port Settings].
4) Select [EtherTalk] and select [Change Settings].
5) Select [Port Status] and select [Change Settings].
6) Select [Enabled] then select [Save].
3
Select [Close] repeatedly until the [System Settings] screen is displayed.