Getting Started
60
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
Installing the Print Drivers for Macintosh OS X
1.
Insert the
Software and Documentation disc
into the appropriate drive on your computer.
Note:
The latest print drivers are available for download from
www.xerox.com/office/ALC80XXdrivers
2.
Open Xerox
®
Print Drivers 3.xx.x.dmg/.pkg as needed for your printer.
3.
To run Xerox
®
Print Drivers 3.xx.x.dmg/.pkg, double-click the appropriate file name.
4.
When prompted, click
Continue
.
5.
To accept the license agreement, click
Agree
.
6.
To accept the current installation location, click
Install
, or select another location for the installation
files, then click
Install
.
7.
If prompted, enter your password, then click
Install Software
.
8.
From the list of discovered printers, select your printer, then click
Next
.
9.
If your printer does not appear in the list of discovered printers:
a.
Click the
IP Address
or
DNS Name
computer icon.
b.
Type the IP address of your printer, then click
Continue
.
c.
Select your printer in the list of discovered printers, then click
Continue
.
10.
If your printer was not detected, verify that the printer is powered on and that the Ethernet or USB
cable is connected properly.
11.
To accept the print queue message, click
OK
.
12.
Select or clear the
Set Printer as Default
and
Print Test Page
check boxes.
13.
Click
Continue
, then click
Close
.
Installing Print Drivers and Utilities for UNIX, Linux and AS/400 Printing
UNIX-based printing uses LPD/LPR port 515 or lp to port 9100 to provide printer spooling and network
print server functionality. Xerox
®
printers can communicate using either protocol.
Xerox
®
Printer Manager is an application that allows you to manage and print to multiple printers in
UNIX and Linux environments. Xerox
®
Printer Manager allows you to:
•
Configure and check the status of network connected printers.
•
Set up a printer on your network and monitor the operation of the printer after installation.
•
Perform maintenance checks and view supplies status at any time.
•
Provide a common look and feel across the many different suppliers of UNIX and Linux operating
systems.
To print from a Linux workstation, install either a Xerox
®
print driver for Linux or a CUPS print driver. You
do not need both drivers. Xerox recommends that you install one of the full-featured custom print drivers
for Linux. To locate drivers for your printer, go to www.xerox.com/office/drivers.
For details about UNIX, Linux and AS/400 printing and drivers, refer to the
System Administrator Guide
www.xerox.com/office/ALC80XXdocs
