Maintenance
208
Xerox
®
AltaLink
®
C80XX Series Multifunction Printer
User Guide
Routine Maintenance Items
Routine maintenance items are printer parts that have a limited life and require periodic replacement.
Replacements can be parts or kits. Routine maintenance items are typically customer replaceable.
Note:
Each routine maintenance item includes installation instructions.
Routine maintenance items for this printer include the following:
−
Waste Toner Container
−
Drum Cartridges
−
Transfer Belt Cleaner
−
Second Bias Transfer Roller
−
Hole-Punch Waste Container
Ordering Supplies
When to Order Supplies
A warning appears on the control panel when supplies near their replacement time. Verify that you have
replacements on hand. It is important to order these items when the messages first appear to avoid
interruptions to your printing. An error message appears on the control panel when supplies must be
replaced.
Order supplies from your local reseller or go to
www.xerox.com/office/ALC80XXsupplies
CAUTION:
Use of non-Xerox supplies is not recommended. The Xerox Warranty, Service
Agreement, and Total Satisfaction Guarantee do not cover damage, malfunction, or
degradation of performance caused by use of non-Xerox supplies, or the use of Xerox supplies
not specified for this printer. The Total Satisfaction Guarantee is available in the United States
and Canada. Coverage could vary outside these areas. Please contact your Xerox
representative for details.
Supply Status
You can check the status and percentage of life remaining for your printer supplies at the control panel
or from the Embedded Web Server. When printer supplies near their replacement time, warning alerts
appear on the control panel.
You can customize the alerts that appear on the control panel and configure email alert notifications
using the Embedded Web Server.
To check the supplies status and set up alerts using the Embedded Web Server, refer to the
System
Administrator Guide
