Xerox AltaLink B80 series, Руководство пользователя

Страница: 42 / 309

C Coonnnneeccttiinngg tthhee PPrriinntteerr
C Coonnnneeccttiinngg ttoo aa W Wiirreedd N Neettw woorrkk
Use a Category 5 or better Ethernet cable to connect the printer to the network. An Ethernet network
is used for one or more computers and supports many printers and systems simultaneously. An
Ethernet connection provides direct access to printer settings using the Embedded Web Server.
To connect the printer:
1. Connect the power cord to the printer, then plug the cord into an electrical outlet.
2. Connect one end of a Category 5 or better Ethernet cable to the Ethernet port on the back of the
printer. Connect the other end of the cable to a correctly-configured network port.
3. Power on the printer.
For details on configuring connection settings, refer to the System Administrator Guide at www.xerox.
com/support/ALB80XXdocs .
C Coonnnneeccttiinngg ttoo aa W Wiirreelleessss N Neettw woorrkk
If you have purchased the Wireless Network Adapter, you can use the Wireless Wizard to connect the
device to a wireless network. If the device is connected to a wired network, you can configure wireless
settings in the Embedded Web Server.
Note:
• For more information, refer to the Xerox ® Wireless Network Adapter Kit Hardware Install
and Setup instructions that are included with the kit.
• The device uses either the wireless or the wired network connection. Activating one network
connection deactivates the other network connection.
For details on configuring wireless network settings, refer to the System Administrator Guide at www.
xerox.com/support/ALB80XXdocs .
C Coonnnneeccttiinngg w wiitthh W Wii--FFii D Diirreecctt
You can connect to your printer from any Wi-Fi-enabled mobile device, such as a tablet, computer, or
smart phone, using Wi-Fi Direct or Soft AP features. The Wi-Fi Direct feature is disabled by default on
the Xerox device.
Note: The Wi-Fi Direct feature is available only on printers with the optional Wireless Network
Adapter installed. After you install the Wireless Network Adapter, the Wi-Fi Direct feature is
enabled by default.
Wi-Fi Direct Overview
The Wi-Fi Direct feature allows you to print from a mobile device to your printer, using one of the
following methods.
• WPS push button, for Wi-Fi Direct-enabled Android devices with the Mopria print plug-in installed.
• Soft Access Point (AP), for Apple iPhones and other mobile devices that do not support the Wi-Fi
Direct function.
42 Xerox ® AltaLink ® B80XX Series Multifunction Printer
User Guide
Getting Started