Xerox AltaLink B80 series, Руководство пользователя

Страница: 227 / 309

Probable Causes Solutions
A network configuration problem exists. Unplug the network cable. If the problem is not
resolved, contact your system administrator to
reconfigure your network installation.
The printer is connected to an outlet with a voltage
or frequency that does not match the printer
specifications. Use a power source with the specifications listed in
Electrical Specifications .
PPrriinntteerr D Dooeess N Noott PPrriinntt
Probable Causes Solutions
The printer is in Power Saver mode. On the control panel, press the Power/Wake button.
The printer has an error. If the Status LED is blinking amber, follow the
instructions on the control panel to clear the error. If
the error persists, contact your Xerox representative.
The printer is out of paper. Load paper into the tray.
A toner cartridge is empty. Replace the empty toner cartridge.
The print cartridge has reached end of life. Replace the print cartridge.
No control panel indicators are lighted. Power off the printer, confirm that the power cord is
plugged in correctly to the printer and the outlet,
then power on the printer. If the error persists,
contact your Xerox representative.
The printer is busy.
• If the Status LED is flashing blue, a previous print
job could be the problem.
1 At your computer, use the printer properties to
delete all print jobs in the print queue.
2 At the control panel, touch Jobs , then delete
all pending print jobs.
• Load the paper in the tray.
• If the Status LED does not flash once after you
send a print job, check the connection between
the printer and the computer. Power off the
printer, then power on.
The printer cable is disconnected. If the Status LED does not flash once after you send
a print job, check the connection between the printer
and the computer.
Xerox ® AltaLink ® B80XX Series Multifunction Printer
User Guide
227
Troubleshooting